data sheet operational specifications features 1. eight alarm modes are selectable for a variety of applications. 2. front-face waterproof structure (nema-4x) is avail- able. 3. spdt contact relay output is provided in a pair. 4. input signal and measurable range are changeable by key operation. specifications pcp this product is a digital type alarming indicator whose front face measures 48 x 48 mm. alarm setter with digital display input signal and measuring range input section: no. of inputs: 1 point input signal: see table 1. measuring range: see table 1. burnout function: upscale or downscale burn- out settable the instrument with burn- out releasing function can also be specified. input sampling period: 0.5 sec input impedance: voltage input; 1m ? or 450k ? or more current input; 250 ? (external mounted resistor) thermocouple; 1m ? or more allowable resistance of signal supply: thermocouple input; 100 ? or less voltage input; 1k ? or less alarm output: no. of outputs 2 points of spdt contact kinds of alarm: see table 2. each point inde- pendently settable contact capacity: 220v ac/30v dc, 3a (resis- tance load) 220v ac/30v dc,1a (inductive load) alarm value settable range: -5 to 105% fs (each point indepen- dently settable) hysteresis settable range: 0 to 102% fs (each point indepen- dently settable) alarm action delay time: settable within 1 to 10 sec alarm action delay time at power-on: settable within 0 to 20 sec indicating section: numerical indication: 7-segment, 4-digit led (upper stage red, lower stage green) indicated contents: alarm set value 1, alarm set value 2, measured value status indication: red/green led lamp. alarm occurrence, power on, measured value indication indicating accuracy: thermocouple input: 0.5% fs 1 digit 3?c (for b thermocouple 0 to 400?c, 5% fs 1 digit 3?c) (for r thermocouple 0 to 500?c, 1% fs 1 digit 3?c) resistance bulb input: 0.5% fs 1 digit voltage/current input: 0.5% fs 1 digit rated voltage: 100 (-15%) to 240 (+10%)v ac 50/60hz 24v ac ( 10%) 50/60hz 24v dc ( 10%) power consumption : 6va max. (at 100v ac or 24v ac) 8va max. (at 200v ac) 3w max. (at 24v dc) ambient temperature: -10 to 50?c external dimensions: 48 (w) x 48 (h) x 93 (d) mm casing color: white or black (when front is waterproof) mass : approx.150 g mounting method: panel flush mounting or rail mounting (according to specified socket) (note) for socket, see outline diagram ?table 1 input signal measurable range ( ? ) (note 2) minimum span ( ? ) group i (note 1) group ii group iii resistance bulb jis (iec) pt100
-150 to 800 150 -150 to 600 -50 to 100 0 to 150 150 150 150 resistance bulb jis (iec) thermo- couple dc voltage dc current thermistor dc4 to 20ma fuji-made thermistor dc1 to 5v dc0 to 5v scalable range j k r b t e s n pl-ii 0 to 800 0 to 1200 0 to 1600 0 to 1800 0 to 1600 -199 to 400 -199 to 800 0 to 1300 0 to 1300 -1999 to 9999 400 400 1600 1800 1600 599 800 1300 1300 jpt100
note 1) input signal can be changed by key operation within the same group, but cannot be changed between different groups. note 2) when the measuring range exceed 1000 ? c, decimal point cannot be used. date EDS10-72B nov. 27, 2003
2 pcp table 2 kind of alarm outline diagram (unit:mm) code symbols 1 y yf description cp p 12345678 910111213 14 4 1 t n p h b c a f n y v c a b 000 400 y d 500 p04 p05 p06 front size (w x h) 48 x 48mm input signal thermocouple resistance bulb pt100, 3-wire type resistance bulb jpt, 3-wire type thermistor dc4 to 20ma dc1 to 5v (input impedance: 1m ? ) dc1 to 5v (input impedance: 450 ? ) revision no. alarm instruction manual/power supply with 2 alarm points not provided/100 to 240 v ac, 50/60 hz japanese version/100 to 240 v ac, 50/60 hz english version/100 to 240 v ac, 50/60 hz not provided/ 24v dc japanese version/ 24v dc english version/ 24v dc not provided for rail mounting, type: tp411x for panel flush mounting, type: tp411sba with burnout releasing function for rail mounting, type: tp411x white casing without front waterproof structure black casing with front waterproof structure (nema-4x) socket non-standard specification note 1) input signal has been factory-set as follows. thermocouple input: k thermocouple 0 to 400?c resistance bulb input: 0 to 150?c thermistor input: 0 to 150?c voltage/current input: scaling 0 to 100% note 2) use a thermistor that matches fuji electric's specifications. note 3) before use, attach the accessory 250
resistor between input terminals. note 4) if a socket of any type other than specified is used, input accuracy cannot be guaranteed. note 5) contact us to select p for the 11th digit, because it is nonstandard. note 1 note 3 note 4 note 4 note 4 note 4 note 5 note 2 for panel flush mounting, type: tp411sba without socket external dimensions panel cutout lateral installation of multiple indicators in close contact note) impossible for front waterproof structure mounting frame 48 t 1 ? t ? 8 85.7 71.5 7 48 44.8 57 panel 9.5 packing (used for front waterproof structure) mounting frame 1 48 57 (48 n-3) +0.5 0 +0.5 0 +0.5 0 +0.5 0 45 45 45 63 min. 63 min. ? ? ? ? ? ? ? ? ? how to read action diagram area : range in which front led is lit area : range in which alarm relay is excited : alarm set value alarm method set value hold value at startup relay and led action action diagram without alarm upper limit absolute value not provided led lit,re- lay excited lower limit absolute value not provided led lit,re- lay excited upper limit absolute value provided led lit,re- lay excited lower limit absolute value provided led lit,re- lay excited upper limit absolute value not provided led lit,re- lay unex- cited lower limit absolute value not provided led lit,re- lay unex- cited upper limit absolute value provided led lit,re- lay unex- cited lower limit absolute value provided led lit,re- lay unex- cited
3 connection diagram note 1 ? measured value input ? 1 u p 5v dc 4 u p 20ma dc thermistor thermocouple t.c. alarm output 2 alarm output 1 power supply 100 u p 240v ac 50/60hz 250
5 4 3 7 8 9 6 resistance bulb b a b set1 set2 6 5 6 5 6 5 ? measured value input ? 6 5 4 + - 2 1 11 10 note 1 1 u p 5v dc 4 u p 20ma dc thermistor thermocouple t.c. alarm output 2 alarm output 1 power supply 24v dc / 24v ac 50/60hz 250
5 4 3 7 8 9 6 resistance bulb b a b set1 set2 6 5 6 5 6 5 6 5 4 + - 2 1 11 10 note 1) for 4 to 20ma dc input, attach the accessory 250 ? resistor between terminals t and y . for ac power supply for 24v dc power supply applicable socket (unit:mm) tp411sba type (panel mounting) tp411x type (rail mounting) terminal screw m3.5 7 27 45 4.5 6.2 16.3 45 25.6 7 6 5 4 3 2 9 10 111 78 40 ? 0.2 two 4.5 mounting holes 7.8 50 31.2 or less 4.5 70 35.4 4 87 11 6 1 5 4 3 2 9 10 terminal screw m3.5 8 two 4.5 holes
pcp scope of delivery indicator main frame, fixture set, instruction manual (as specified in code), soket (as specified in code), shunt resis- tor (250 ? ) (for current input), panel face packing (for front waterproof structure) information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
